Air conditioning: how to take care of equipment and its operation

Does less cooling always mean that the conditioner has broken down? Not necessarily. Dusty filters, clogged discharge of condensate or a dirty indoor block can affect the operation of the unit and create unpleasant aromas. Air conditioning starts with regular care, but professional examination is also important for full operation.

In this article we will consider how to clean up filters, notice possible malfunctions and understand what professional maintenance may involve. Let's also see how to handle when the indoor block drips water, cooling becomes weaker or the equipment begins to smell unusually.

Daily cleanliness and professional inspection complement each other. Commodus provides engineering systems design, assembly and maintenance, including air conditioning systems. Specialist inspection helps to evaluate the condition of the equipment and to detect changes in its operation in time.

Why is air conditioning important for home comfort?

The conditioning is not only filter removal and cleaning. It includes cleaning and operating the device to detect changes that may affect air flow or cooling in a timely manner. A clean filter helps to maintain air circulation, but regular attention allows you to distinguish between simple user care and situations when expert examination is needed. Also in the general description of For heating, ventilation and air conditioning systems stresses the importance of clean heat exchanges.

Maintenance of the air conditioning is a regular check of the purity, condition and performance of the equipment and not just of the filter cleaning.

What can be done to help you to detect?

Dust on filters, unpleasant aromas and less cooling should not be ignored. If the room does not cool as usual, the reason may be a dirty filter, but also possible other malfunction. The user can care for the surfaces and details to which the manufacturer's instructions provide access, as well as observe whether the equipment is operating in the usual mode. Technical inspection and repair is entrusted to a specialist, because self-helping in the internal parts of the device can not solve the problem.

Home conditioner is not the same as a car conditioner

The vehicle's conditioner operates in the vehicle, while the interior and outdoor units of the home split system are installed in the building. Therefore, tests or filling descriptions of the car conditioner are not automatically applicable to the home equipment. If the home system is cooled less, it should not be immediately assumed that it needs filling. First, the possible reason must be clarified and the technical questions must be left to the specialist.

How is the air conditioning maintained and verified by a specialist?

The scope of the professional examination work may vary according to the design, condition, conditions of use and manufacturer's instructions. Therefore, maintenance of the air conditioning does not necessarily imply the same procedure. The specialist shall evaluate the performance of the equipment and determine which parts should be taken into account.

The following areas may be addressed during the inspection:

• Filters and airflow: The cleaning or replacement procedures shall be determined by the manufacturer's instructions.
• Heat exchanger: This part of the equipment helps to transfer heat, so its cleanliness is important for operation. The dismantling and cleaning of internal parts should not be done independently.
• Discharge of condensate: verify that the water generated during operation of the installation is discharged in the intended way.
• Performance characteristics: assess cooling, noise and other changes that are reported by the user.

Filters, heat exchangers and condensate discharge

The clean filter can affect the air flow, but the different parts of the equipment are not to be shared in the same way. The type and frequency of the filter care is determined by the instructions of the particular model. Heat exchangers and condensate discharge systems are assessed by the specialist, taking into account the design of the equipment and the manufacturer's instructions.

When is the in-depth technical inspection required?

If the conditioner operates unevenly, it causes unusual noise, water or interference recurring, apply specialist diagnostics. Also, the examination and repair of the refrigerant system is left to the specialist. Do not open or repair the technical parts of the equipment itself. Before the check, check the signs observed, for example, when they started and how they are manifested, so that the specialist can assess the particular situation.

What can you do yourself and how to recognise that air conditioning is needed?

The user is allowed to clean the filters for some models, but the correct order and frequency is determined by the instructions of the manufacturer of the equipment. A single schedule is not suitable for all conditioners, so first you can follow the instructions of your model.

Which features should not be ignored?

The less well-cooled, unaccustomed sound, unpleasant aroma or visible water leak is a reason to draw attention to the equipment. One sign does not tell us what exactly happened. Check that the instructions are designed for a user to take care of the device, but do not try to identify the technical cause or repair the equipment itself.

How to use the manufacturer's instructions for daily care?

Find instructions by the machine model and check how it describes the filter care. If you are indicated that you can remove and clean the filter yourself, follow the instructions described in the instructions. Do not break the indoor unit and do not access the refrigerant system. Filter cleaning helps to keep the device clean, but does not replace professional inspection or repair.

If you notice a change, proceed sequentially:

1. Note the following: observe changes, such as in air flow, sound or cooling.
2. Check the instructions: Checks the user care that the model allows.
3. Only authorised: a filter as specified but not interfering with the inside parts of the equipment.
4. Engage a specialist: if the disturbance persists or is leaking, noise or unpleasant odour, a professional examination shall be applied.

If you want to better understand the type of equipment that also provides cooling in the dwelling, get acquainted with air-air heat pumps.

How to choose professional air conditioner maintenance in Latvia?

The maintenance content is adapted to the model of the equipment, its state and the manufacturer's instructions. Therefore, the scope of the work is determined by the system check. Before maintenance, the model name or the equipment documentation is prepared and the changes noted are briefly recorded.

The service offered to the public in Latvia will be applied to simpler maintenance prices starting at about 30 €, maintenance costs about 70 €, excluding VAT, but the thorough cleaning can be about 120 €, excluding VAT. These are market-based guide prices, not the Kommodus price list. The exact amount depends on the type of equipment and the amount of work required.

What to discuss before maintenance work starts?

Specify the model of the equipment, describe the changes observed in the activity and tell you what care has been done so far. This information helps to assess the situation and adapt the test to the particular system. Commodus provides engineering system consulting, design, assembly, maintenance and technical support.

Conditioner as part of a housing climate system

Part of the house's climate equipment provides both cooling and heating. To get acquainted with the category of such solutions, see Air-to-air heat pumps.

Find Commodus air conditioning solutions and learn more about the equipment and its maintenance.

Take Care of Conditioner in Time

Care of the equipment begins with compliance with the manufacturer's instructions and attention to its operation. Coping with the instructions is one step, but also follows the changes in air flow, cooling or operating sound. If leakage, unpleasant aroma or repeated interference occurs, do not try to determine the cause after only one characteristic. Professional air conditioning service allows to evaluate the equipment according to its model and condition, but entrust technical works to the specialist.

Commodus provides engineering systems design, assembly and maintenance. Air conditioning is part of a home climate solution, where daily care and professional support complement each other.

Contact Kommodus about air conditioning solutions and equipment maintenance.

Frequently Asked Questions about Conditioner Maintenance

How often does air conditioning maintenance be required?

The maintenance frequency is determined by the manufacturer of the equipment and the intensity of the use of the conditioners. First, check the instruction of the model, not rely on one schedule that is supposedly suitable for all equipment. If the condition is used frequently or its operation is monitored by changes, professional examination helps to assess the current state.

Can air conditioning filter be cleaned by itself?

Yes, if the manufacturer's instructions for the model in question provide that the filter may be cleaned by the user. The procedure for removal, cleaning and insertion described therein is not the same as maintenance of the entire device.

How do I understand that the air conditioning needs maintenance?

Pay attention to weaker cooling, unusual noise, unpleasant aromas or visible water leak. These signs may indicate that the operation of the installation has changed, but they alone do not reveal the cause. Record what happened and when and do not try to break the equipment. If the interference persists, apply expert examination.

Is the maintenance and repair of the air conditioner the same?

No, maintenance and repair are different works. During maintenance, the specialist evaluates the condition and operation of the equipment, while repair is necessary if a defect or a specific malfunction is detected. Maintenance may reveal the need for repair, but these works are not interchangeable. The technical cause and necessary works are determined by the inspection of the equipment.

Can air conditioning be maintained better?

Maintenance helps to detect dirt or abnormal operation and evaluate whether it affects the conditioner's performance. If the filter is dirty, care for it can help to restore the intended airflow. The specific result depends on the condition of the equipment and the findings of the inspection.