Daikin Altherma low-temperature monobloc

A monobloc is the right solution when a simple system is required, consisting of one outdoor unit without indoor units.

• Everything is combined in one outdoor unit
• Fast and simple installation, as only water pipes need to be routed from the outdoor unit into the building
• Saves space, as the units are installed only outside the building
• Anti-freeze protection for hydraulic components.

Why choose a monobloc system?

• The heating system does not take up space inside the building
• Fast installation: only water pipes need to be routed from the outdoor unit into the building, as all hydraulic components are located in the outdoor unit.

The outdoor-only Daikin Altherma monobloc is available in the following versions:

• heating only, or heating and cooling
• with or without a base plate heater
• single-phase or three-phase
• 6 kW, 8 kW, 11 kW, 14 kW or 16 kW

Backup heater, a separately installed 6 kW heater for 6–8 kW models is available by special order. Standard built-in heater for 11–14–16 kW models.

Daikin Altherma low-capacity models (from 6 to 8 kW) are equipped with a swing compressor. Over the last 10 years, swing compressors used in thousands of outdoor units have set the benchmark in energy efficiency by virtually eliminating leakage and friction.

Scroll compressors, used in Daikin Altherma monobloc models from 11 to 16 kW, are compact, robust and quiet, ensuring optimum operational reliability (no valves or built-in oscillating levers) and efficiency thanks to low initial flow and a constant compression ratio. This technology is used in many Daikin heat pumps.

Anti-freeze protection for hydraulic components, to protect the water pipes from freezing during winter, all hydraulic components are insulated and a special programme is used that switches on the pump and backup heater when required. This prevents the water temperature from falling below the freezing point and removes the need to add glycol to the water pipes.